For many families, the kitchen has always been "clean". Not only is there a lot of food, but also a mess, and the cooking of three meals a day is bound to produce a lot of kitchen waste. Daily garbage disposal is also the most troublesome.
For a long time, the filter will be attached to thick oil stains, and the inside of the flue gas will be dirty. If the stains inside the smoke machine are left unchecked, long-term accumulation will lead to bacteria breeding and reduce the effect of smoking and lampblack. In this way, the cleaning inside the flue gas engine is particularly important.
On the market Integrated stove Most of them have three kinds of cleaning methods. Now let's compare them.
Water cleaning is the most common washing of water into the integrated stove cleaning machine inside stains. This method is obviously a relatively simple and crude way of handling. Not to mention the extent to which the stains accumulated over a long period of time in the integrated stove can be cleaned. The contact between water and parts is prone to rust and rot, and the safety of water and electricity can not be guaranteed.
Steam cleaning is simply the use of high temperature steam to rinse the impeller and the inner cavity of the air channel to clean the oil.
This cleaning method is better than water cleaning. However, high temperature steam spraying on the wind wheel, insufficient impact strength, stubborn oil stains are difficult to be completely removed, and there are still parts rusted and rotten. Although most of the market claims that hydropower is safe and isolated, long-term use may still pose risks.
Electric heating dry cleaning
Electric heating dry cleaning is using high temperature heating to melt stubborn oil stains. Under the action of gravity and the centrifugal force of wind wheel rotation, the oil melts melt into the oil collecting box along the oil hole.
The cleaning rate of oil cleaning by electric heating is over 99%. There is no problem of rust and corrosion and water and electricity safety caused by water cleaning or steam cleaning. Temperature control is safe and energy saving in the range of melting oil but not too high.
Wan Shi Xing integrated oven automatic electric heating dry cleaning
Wan Shi Xing uses the most advanced electric heating dry cleaning in the industry, which is cleaner and safer than steam cleaning and water cleaning.
When the fan is closed, short press the "cleaning key" will enter 30 minutes automatic electric heating cleaning. At this time, the integrated casing volute is heated at high temperature after the electric wire is heated, and the stubborn oil stains will melt into liquid. After the fan rotates, the centrifugal force is generated, so that the melted oil flows into the oil collecting box of the integrated cooking stove along the oil guiding hole on the lower side. The impeller was quickly dried up and looked as clean as new.
At the same time, Wan Shi Xing uses flue system whole Teflon coating treatment, no oil and heat resistance, at 250 degrees Celsius high temperature, all silk will not be affected! Not only can the oil flow slip into the oil collecting box, but also ensure that the inside of the flue gas is not affected by high temperature.
The safe and reliable electric heating dry cleaning system has brought great convenience to the consumers. After cleaning, the inside and outside of the flue gas engine is clean and dry, which not only prevents bacteria from growing, but also ensures that the suction of the flue gas is not affected by the impurity of oil.
How can it be tempting to use such a key to save oil and grease?
Editor: integrated oven net - Berry Berry